CZ Series Standard Chemical Centrifugal Pump
Standards
• ISO 2858
• ISO 5199
Operating Parameters
• Capacity Q: up to 2000 m3/h (8800 GPM)
• Head H: up to 160 m (525 ft)
• Pressure P: up to 2.5 MPa (363 psi)
• Temperature T: -30 to 180 °c ( -20 to 356 °F)
Features
• Standard modularization design
By utilizing the rear pull-out design, the bearing pedestal, which consists of the impeller and shaft seal, can be easily removed while the volute casing remains in place. In the case of a spacer coupling, there is no need to remove the driver. This design feature provides convenience and efficiency during maintenance or repair of the equipment.
There are three available options for the standard seal arrangement: gland packing, single mechanical seal, and double seal.
The standard suction and discharge flanges for GB9113.1-2000 PN 2.5MPa are in place. Additionally, users may have the option to request other standards as per their requirements. It is important to note that the generated content will be significantly different from the original text information.
• When observed from the drive end, the pump rotation is in a clockwise direction.
These motor side jack screws are designed to simplify the alignment setting process. They enable you to easily adjust the position of your equipment for optimal performance. Using these jack screws can make a significant difference in the alignment and stability of your motor, ultimately leading to better efficiency and productivity.
Choice of Materials
• Carbon steel
• 12% chrome
• Austenitic stainless steels
• Duplex stainless steels
• Super duplex stainless steels
• Hastelloy
• Special alloy steels
Industrial Applications
• Chemical
• Oil and Gas
• Power plants
• Petrochemical
• Coal chemical industry
• Offshore
• Desalination
• Pulp and Paper
• Water and Wastewater
• Food and Beverage
• Mining
• General industry
Hot Tags: standard chemical centrifugal pump, China standard chemical centrifugal pump manufacturers, suppliers, factory
