Different types of deep well submersible pumps are available to meet various requirements based on different habitual conditions, necessitating different transportation needs for different situations. Thus, it is essential to carefully consider the actual circumstances and select suitable equipment accordingly. To ensure the optimal functioning of the equipment, it is important to know how to properly discharge the oil in the pump to prevent any adverse impact on its normal operations.
To drain the oil in the deep well submersible pump box, simply turn the oil drain plug located at the bottom of the box counterclockwise and allow the oil to drain out completely.
To maintain the efficiency and longevity of the deep well submersible pump, it is crucial to prevent the oil level from exceeding 30 mm above the top plate of the oil tank during external draining. This ensures that the pump's bearings remain properly cooled and lubricated. However, in cases where the working chamber of the jack has a large capacity, it may be necessary to introduce an additional fuel tank to avoid emptying and maintain a minimum liquid level of 100 mm after external oil discharge. This prevents any disruptions to the pump's operation and ensures its smooth functioning over an extended period.
After the hydraulic deep well submersible pump has been in operation for 500 hours, it is necessary to perform maintenance tasks such as changing the oil and cleaning the oil tank and oil filter. The oil quality can be assessed using both visual inspection and laboratory methods. If the oil quality deteriorates, it is crucial to replace the oil promptly. During the oil change process, it is essential to clean both the oil tank and oil filter. If there is any presence of metal shavings or water in the oil, it is important to identify the cause and take appropriate measures to resolve the issue.
When the liquid level drops down, the bearing is rapidly smoothed out by the oil that is attached to it and by the oil that is splashed by the plunger spring. The oil filters that are present in oil tank and pump are made up of 230 mesh per inch copper wire mesh. It is important to keep these filters clean to prevent any kind of blockage. While using the fuel tank, the temperature of the oil should not go beyond the limit of 60°C. If necessary, appropriate measures should be taken to ensure that the oil temperature is kept under control.
Regular maintenance is crucial for the proper functioning of the Shenyang deep well submersible pump. Failure to adhere to the prescribed operating process can lead to potential issues during drainage. Therefore, it is important to follow the recommended procedure to ensure optimal performance. Additionally, conducting periodic maintenance checks is essential to prevent any disruptions in the equipment's normal usage.